Purair Ductless Labortory Fume Cupboard

The Purair range of ductless laboratory fume cupboards have been designed to provide operator protection when using hazardous substances. A face velocity >0.5 M/Second ensures containment of fumes and an alarm will alert the operator if the airflow falls to an unacceptable level.

All mechanisms in the head section of the Fume Cupboard are on the clean side of the filter, thus preventing contamination. Switches and electrical components are totally isolated from the dirty airflow and away from any contamination. The work area also has a removable spillage tray which can be easily cleaned.

FEATURES

• SAFETY FILTER
  Additional safety backup filter available
• FILTER I.D. WINDOW
  Ensures correct filter installation and its replacement date
• CONTROL PANEL
  Easy to use control panel includes switch for fan, lights, an electronic hour counter, low airflow alarm, and optional filter saturation alarm
• INTEGRAL PORT
  An integral test port allows manual filter monitoring
• ENHANCED OPERATOR SAFETY
  Pre-filter is changed from inside the enclosure preventing any particulate hazards
• 360 DEGREE VISIBILITY
  Clear back and side panels for 360 degree visibility
• STEEL SUPPORT FRAME
  Chemical resistant epoxy coated steel superstructure for unsurpassed strength
• PASS THROUGH PORTS
  Cable pass through ports allow electrical cords to enter the workzone
• MOBILE CART
  The optional mobile cart has a convenient lower shelf and can accommodate wheelchair access
• BASE CABINET
  The optional base cupboard can be used to store chemicals and includes a cup sink, swan neck tap outlet and service fixtures
• SPILLAGE TRAY
  The spillage tray slides out for easy cleaning (available in white or black).

FILTER SELECTION

The main filter can be chosen from 14 different types of carbon, which include specialty media for vapors of organics, solvents, acids, mercury and formaldehyde. HEPA filters for particulate filtration are also available to suit your application needs. In addition, the Purair can be equipped with a secondary back-up filter for added protection.

EFFICIENT AND ECONOMICAL

These Laboratory Fume Cupboards are energy saving. Clean air is re-circulated into the laboratory, therefore, they do not exhaust expensive conditioned and/or heated air into the atmosphere.

MICROPROCESSOR CONTROLLER

The optional microprocessor controller monitors all cupboard safety parameters including airflow, containment, and filter condition. Audio and visual alarms alert the operator whenever any operating conditions become unsafe.

SIZES

The Purair comes in a range of sizes from 750mm to 1750mm in width. All cupboards are 700mm in depth and 1210mm in Height.

FOR FURTHER INFORMATION....

If you require further technical specifications for this Laboratory Fume Cupboard or you would like to receive a complimentary brochure of our other recirculating Fume Cupboards, please Contact Air Science.